The following points should be paid attention to during the use and maintenance of the reactor winding machine:
Daily cleaning: The reactor winding machine will generate a lot of dust and oil during operation, and the machine needs to be cleaned frequently. When cleaning, use a clean cloth or brush to remove dust and stains. For electrical components, use clean water with a small amount of alkali and a special brush to clean, and ensure cleanliness and dryness.
Lubrication: The reactor winding machine needs to be lubricated during operation to reduce wear and extend the service life of the machine. The amount of lubricating oil should be controlled within the specified range, and the lubricating oil should be replaced regularly to ensure the normal operation of the machine.
Electrical system inspection: The electrical system is one of the key components of the reactor winding machine. The cable should be checked frequently for damage, whether the electrical plug is in good contact, and other problems should be repaired and replaced in time.
Troubleshooting: The reactor winding machine may have some faults during operation, such as coil breakage, feeder inaction, turntable jamming, etc., which need to be diagnosed and solved in time. During repair, make sure the machine is turned off and unplug the power plug to avoid electric shock or damage to the machine.
Use environment: To increase the service life of the equipment, avoid direct sunlight and other heat radiation, and avoid places that are too humid, too dusty or have corrosive gases. The equipment should be kept away from equipment with large vibrations, such as punching machines, forging equipment, etc.
Power supply guarantee: In order to avoid the influence of large power fluctuations and possible instantaneous interference signals, winding machine equipment generally uses dedicated power supply or adds voltage stabilizing devices to reduce the influence of power supply quality and electrical interference.
Operating procedures: Formulating and complying with operating procedures is one of the important measures to ensure operation. Formulating practical operating procedures, including lubrication, maintenance, reasonable use and standardized shift systems, can reduce the occurrence of faults.
Equipment maintenance: The equipment should not be sealed for a long time. It should be powered on regularly to use the heat generated by the components themselves to reduce the humidity in the machine, so that the electronic components will not be damp, and it can also promptly detect whether there is an alarm for insufficient battery power to prevent the loss of system setting parameters.
