How to use the winding machine mainly includes the following steps:
Preparation: First, make sure that the power connection of the winding machine is normal, and select the appropriate wire and frame as needed. It is very important to understand the type and characteristics of the wire, the number of turns, the appearance material and the winding speed.
Installation and debugging: Install and debug the equipment according to the model and specific needs of the winding machine. This may include the installation of the chassis seat, the fixing of the conductor rod and the vertical wire rod, the installation of the yarn, etc.
Operation steps:
Switch use: Turn the switch to manual gear to perform wire storage and brake operations.
Speed adjustment: Adjust the speed of the winding machine according to the thickness of the wire. Thin wires should not be too fast, and thick wires need to ensure that the medium and low speed torque is sufficient.
Wire arrangement density: Adjust the position of the wire arrangement device and the outlet distance to ensure that the wire arrangement is neat and avoid wire jump.
Notes:
Wire characteristics: Wires of different materials (such as self-adhesive wires, enameled wires, etc.) require different settings, such as wire diameter and winding speed.
Aluminum wire processing: When using aluminum wire, the tension should be reduced to avoid thinning the wire diameter or cracking the outer insulating paint.
